6 errors my arse. 40-odd.
So. Find plug in loom. Removed old tape from previous and continuity checked then resistance check from plug backwards.
Stab finger.
Traced concern to the multiplug itself - ie no continuity back into harness. I could have scoped the sensor at this point and checked but meh.
Repaired poor connection and blimey, a signal.
The last picture above - the top four are all related to the signal wire issue, the bottom two we'll come to later. That's building the anticipation, eh.
- IMG_20190717_101654_TC.jpg (467.71 KiB) Viewed 4670 times
Voltage out of range can be 0v. Remember that.
Ps - apologies if I'm over doing it, I'ts hard to know what you already know, or wish to see.