Eddie Honda's wheels of steel (and occasionally alloy)

Talk about your cars etc here. Keep it sort of sensible and on topic please.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

1987 Land Rover 110

Joe popped round today. Got away with just adjusting the rear brakes. Had a peek at the servo and it looks sound and not cracked. Took it for a test spin up the road and back and it went and stopped fine. CVRT expires on Wednesday, so hopefully it doesn't come back with a big long list. He's done around 4k since the last test 6 months ago.

Can't remember the last time I drove a manual. It's been a while anyway.


ST1100 Pan European

While I had some ballast available, I got Joe to lean on the back of this. I disconnected the speedo cable (again) at the bottom and checked if the speedo drive was rotating at the wheel drive end. No it wasn't. So I think I know what the problem is now. The tabs on the speedo drive plate might be squished by careless front wheel installation. At least it appears not to be the instrument end.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

TOOLAGE

Ordered some extractor hand pump things from the Great Bunch of Lads: 3 x 200ml & 2 x 500ml. Thought they might come in handy for removing small quantities of various liquids.

Unfortunately, the packaging was a bit lame, so I got Honda Junior 2 to take an unpacking video.

The two cardboard boxes have the 500ml ones.

c1_20240216_04103247.jpeg
c1_20240216_04103247.jpeg (176.16 KiB) Viewed 360 times

The treble bagged set survived the trip surprisingly.

c1_20240216_04103234.jpeg
c1_20240216_04103234.jpeg (171.41 KiB) Viewed 360 times

Unfortunately one of the big ones had a broken knob.

c1_20240216_04103222.jpeg
c1_20240216_04103222.jpeg (161.59 KiB) Viewed 360 times

They all came with various tubes and spare o-rings.

The big ones were €12 a piece including shipping. First I confirmed receipt of the items. Then I filed a returns/refund claim. Having done this once before, when due to a sorting error, I found a charger destined for somebody else (Australia) I knew a picture alone might not cut it (They knocked me back until I sent them a video as well as the pictures).

There was a box for a refund amount (€0 to €23.50) so I put it €6.00 (as in knock 50% off for the bust knob please)

Uploaded the video and two pics.

Screenshot_2024-02-16-04-00-59-186_com.alibaba.aliexpresshd.jpg
Screenshot_2024-02-16-04-00-59-186_com.alibaba.aliexpresshd.jpg (114.58 KiB) Viewed 360 times

And 11 seconds later it's fair enough, have €6 back. Thankyouverymuch. Painless.


Later, after I left for work, one of Jeff's lackeys had slotted these through the letter box. Hand things to adapt a 19mm / 13mm / 10mm ratchet spanner into a ½" / ⅜" / ¼" square drive ratchet for sockets and also a ¼" hex bit holder. The square drives have a spring loaded bump on one hex face to lock them.

c1_20240216_04103305.jpeg
c1_20240216_04103305.jpeg (439.47 KiB) Viewed 360 times
c1_20240216_04103262.jpeg
c1_20240216_04103262.jpeg (344.75 KiB) Viewed 360 times

Right now I can only find everything BUT those sizes in my ratchet spanner rack. Typical!
User avatar
Drum
Not Your Average Hoarder
Posts: 4865
Joined: Tue Apr 09, 2019 11:02 pm
Has thanked: 3039 times
Been thanked: 2175 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Drum »

Have your socket sets lost their ratchets?
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Drum wrote: Fri Feb 16, 2024 8:31 am Have your socket sets lost their ratchets?
Trying to lighten the mobile tool box.
User avatar
mercrocker
Numb3rP14t3Fun
Posts: 17057
Joined: Fri May 17, 2019 2:53 pm
Has thanked: 12281 times
Been thanked: 8700 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by mercrocker »

Eddie Honda wrote: Fri Feb 16, 2024 4:39 am TOOLAGE


c1_20240216_04103305.jpeg
c1_20240216_04103262.jpeg


Right now I can only find everything BUT those sizes in my ratchet spanner rack. Typical!
You may have done what I invariably do....Put them somewhere to remind you to order the accessories and before those have come have to move the things out of the way - but not back where they belong. They'll turn up under the kitchen sink or somewhere.
There's a great long bar in Rock & Roll heaven.......
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Well I found the 10mm one in the boot of the car...
dean36014
Posts: 854
Joined: Fri Apr 12, 2019 12:08 pm
Location: Coventry
Has thanked: 90 times
Been thanked: 676 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by dean36014 »

Who do you order off Eddie ?
Scratch that, found it in description.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

1987 Land Rover 110 UPDATE
Eddie Honda wrote: Sun Feb 11, 2024 9:40 am
...CVRT expires on Wednesday [14/02/24], so hopefully it doesn't come back with a big long list. He's done around 4k since the last test 6 months ago.
It went in for test yesterday.

IMG-20240222-WA0001~2.jpg
IMG-20240222-WA0001~2.jpg (312.2 KiB) Viewed 260 times
IMG-20240222-WA0000.jpg
IMG-20240222-WA0000.jpg (184.21 KiB) Viewed 260 times

I shall have a look later, but I suspect the tester might be blind or being a bawbag...or both. Fucking thing.
User avatar
Drum
Not Your Average Hoarder
Posts: 4865
Joined: Tue Apr 09, 2019 11:02 pm
Has thanked: 3039 times
Been thanked: 2175 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Drum »

Bad luck.
Is this the Jizz?
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21549
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13440 times
Been thanked: 13262 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Drum wrote: Sat Feb 24, 2024 10:25 pm Bad luck.
Is this the Jizz?
No, if you hit the backquote it's that BLOODY Land Rover 110!

CVRT is for commercials. NCT is cars.
Post Reply