Page 26 of 130

Re: Stupid questions about motorised conveyances

Posted: Mon May 16, 2022 3:31 pm
by Eddie Honda
Not very visible from this angle
5468696901_a398a02991_h.jpg
5468696901_a398a02991_h.jpg (400.78 KiB) Viewed 717 times

Re: Stupid questions about motorised conveyances

Posted: Tue May 24, 2022 8:23 pm
by christine
I took the steering wheel off of my mk1 fiesta a couple of years ago , as its parked remotely away elsewhere , and didn't want it pinched .. and i cant for the life of me remember how it goes back on ! Anyone know ?

Re: Stupid questions about motorised conveyances

Posted: Tue May 24, 2022 11:18 pm
by Hooli
Aren't they just line it up on the splines then shove like everything else?

Re: Stupid questions about motorised conveyances

Posted: Wed May 25, 2022 10:12 pm
by DodgeRover
Can I pick the collective knowledge here please?
My father has been told he needs a new blower motor for his RHD 2000 4.7 Jeep Grand Cherokee, he's been given a part number by the person doing the work (not sure where it came from) of 4864956 - except there is nothing available in this country.
Checking Rock Auto and they list one at £233 + everything on top to get it here, shows as fitting grand Cherokee from 97-01.
Looking at the parts breakdown on rock auto and that number doesn't come up at all and they are about £30... I'm assuming this is for the LHD model though?
What's the chances of a heater motor being only suitable for a RHD?
He's also been told the resistor box and connectors have melted which is an easy fix of about £14...TBH if it was mine I would just order a new box and chunk of loom and see how hot it gets whilst trying simultaneously to get some lubrication into the blower bearings but I'm not the one doing the work on it....

Can anybody do some Rainman type cross referencing and work out if that part number for the motor is what it actually needs? Vehicle reg is X158 KNP

Thanks everybody

Re: Stupid questions about motorised conveyances

Posted: Wed May 25, 2022 10:52 pm
by Hooli
Paging Eddie Rainman Honda....

Re: Stupid questions about motorised conveyances

Posted: Wed May 25, 2022 11:03 pm
by Eddie Honda
Paging Warren. He knows all about Jeeps.

Re: Stupid questions about motorised conveyances

Posted: Thu May 26, 2022 12:59 am
by Warren t claim
christine wrote: Tue May 24, 2022 8:23 pm I took the steering wheel off of my mk1 fiesta a couple of years ago , as its parked remotely away elsewhere , and didn't want it pinched .. and i cant for the life of me remember how it goes back on ! Anyone know ?
It should screw straight back on but be careful that the column hasn't sunk down and the two pins in the collapsable bit haven't fallen out.

Re: Stupid questions about motorised conveyances

Posted: Thu May 26, 2022 3:31 am
by Eddie Honda
DodgeRover wrote: Wed May 25, 2022 10:12 pm Checking Rock Auto and they list one at £233 + everything on top to get it here, shows as fitting grand Cherokee from 97-01.
Looking at the parts breakdown on rock auto and that number doesn't come up at all and they are about £30... I'm assuming this is for the LHD model though?
What's the chances of a heater motor being only suitable for a RHD?

[Snip]

I'm not the one doing the work on it....
Short story - he's humped.

Yes, the RHD motor is umpteen times more expensive.

It would appear that the blower box is a mirror image between LHD and RHD cars, hence the motor spinning the opposite direction and the hamster wheel vanes being reversed too.

http://www.ausjeepoffroad.com/forum/sho ... p?t=124788

https://www.wranglerforum.com/threads/2 ... hd.264356/

So unless you want to get involved and start fannying around with the motor bearings, etc. then there's not a lot you can do.

Re: Stupid questions about motorised conveyances

Posted: Thu May 26, 2022 6:22 am
by paulplom
Could you not split it and just swap the motor?

Re: Stupid questions about motorised conveyances

Posted: Thu May 26, 2022 7:50 am
by LynehamHerc
I think that Eddie says that it spins in the opposite direction.