Page 38 of 97
Re: 1966 Plymouth Fury 3
Posted: Thu Jul 28, 2022 12:04 pm
by PhilA
Asimo wrote: ↑Thu Jul 28, 2022 7:11 am
The two large holes in the rear-window shelf look exactly like they were made for loudspeakers. A pair of rear speakers (stereo) seems very advanced for 1966. First year of 8-track or were there stereo radios for cars by ‘66? (The stereo radio system was only standardised in ‘61)
Yup, stereo speakers for 8-track option.
Included reverb unit under the shelf too.
Re: 1966 Plymouth Fury 3
Posted: Thu Jul 28, 2022 11:22 pm
by PhilA
- 20220728_164015_1.gif (1.53 MiB) Viewed 561 times
Good news, I still can't weld for toffee. At least the machine still works.
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 12:56 am
by PhilA
More good news.
- 20220728_184828.jpg (251.85 KiB) Viewed 558 times
Found the missing reversing light lens. It's all beaten up but it should glue together.
Phil
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 1:38 am
by PhilA
Yet more good news!
- 20220728_185953.jpg (137.65 KiB) Viewed 556 times
I found my turn signal stalk!
Edit: Had some time so had a go at making these pieces better.
- 20220728_212110.jpg (309.07 KiB) Viewed 555 times
Turn signal stalk buffed up.
- 20220728_210105.jpg (247.99 KiB) Viewed 555 times
Super glued the lens back together.
Phil
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 5:19 pm
by Scruffy Bodger
That's quite a transformation on that stalk, you wouldn't think it'd improve that much?
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 5:24 pm
by PhilA
Scruffy Bodger wrote: ↑Fri Jul 29, 2022 5:19 pm
That's quite a transformation on that stalk, you wouldn't think it'd improve that much?
The lighting flatters it.
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 5:49 pm
by SiC
PhilA wrote: ↑Thu Jul 28, 2022 11:22 pm
20220728_164015_1.gif
Good news, I still can't weld for toffee. At least the machine still works.
A very old school visor! Modern automatic one should free up that hand to allow you to steady the torch with it. I'm pretty rubbish single handed and need my other hand to prop the torch and steady it if I need more than just a tack.
Re: 1966 Plymouth Fury 3
Posted: Fri Jul 29, 2022 8:04 pm
by PhilA
SiC wrote: ↑Fri Jul 29, 2022 5:49 pm
A very old school visor! Modern automatic one should free up that hand to allow you to steady the torch with it. I'm pretty rubbish single handed and need my other hand to prop the torch and steady it if I need more than just a tack.
Yup. I have a modern one on my wish list. Just didn't seem wise to buy one if the machine remained broken.
Re: 1966 Plymouth Fury 3
Posted: Sat Jul 30, 2022 1:13 am
by PhilA
After work today was gauges and stuff day.
- 20220729_143520.jpg (316.44 KiB) Viewed 492 times
I found the handle for the parking brake release. The red lens has a flashing bulb behind it that comes on when you depress the brake. Amusingly, I discovered that the parking brake actually works.
- 20220729_100312.jpg (421.84 KiB) Viewed 492 times
The left hand gauges in the car were dirty. The spare ones unfortunately ended up submerged in rainwater in a plastic tote after the storm.
- 20220729_114300.jpg (195.6 KiB) Viewed 492 times
Tested the gauges still work (even the submerged ones!) which is a good thing.
- 20220729_170125.jpg (257.25 KiB) Viewed 492 times
I cleaned and repaired the PCB for the lights and gauges.
- 20220729_170112.jpg (238.24 KiB) Viewed 492 times
The needles got a coat of orange paint.
- 20220729_172625.jpg (237.29 KiB) Viewed 492 times
Wire wheeled the surround down and removed the rust.
- 20220729_173131.jpg (185.27 KiB) Viewed 492 times
Coat of flat black has it looking nice. Polished the lens up too.
- 20220729_185903.jpg (311.81 KiB) Viewed 492 times
All the beige looking parts of the surround were originally chromed, but that had gone bad with time and damp.
So, the next best thing in my budget, bright metallic silver.
The surround by the words will go light gray and the ribbed bit in the middle will go flat black as it was.
Hopefully that'll look nice.
Phil
Re: 1966 Plymouth Fury 3
Posted: Sat Jul 30, 2022 3:43 am
by PhilA
I've been led to believe there's a more shiny silver paint available.
I shall have to find it and try it.