Got about that amount up my nose toorichardthestag wrote: ↑Tue Nov 10, 2020 1:05 pmI have about 2kg of used grinder sparks on the workshop floor. I expect SIC does too
1974 Dolomite Sprint
-
- It's S small i C
- Posts: 9373
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1826 times
- Been thanked: 5404 times
Re: 1974 Dolomite Sprint
- Scruffy Bodger
- TeeShirtFun
- Posts: 5329
- Joined: Mon May 27, 2019 9:18 pm
- Has thanked: 8125 times
- Been thanked: 2423 times
Re: 1974 Dolomite Sprint
Had a blob in your ear yet?SiC wrote: ↑Tue Nov 10, 2020 9:31 pmGot about that amount up my nose toorichardthestag wrote: ↑Tue Nov 10, 2020 1:05 pmI have about 2kg of used grinder sparks on the workshop floor. I expect SIC does too
-
- It's S small i C
- Posts: 9373
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1826 times
- Been thanked: 5404 times
Re: 1974 Dolomite Sprint
Thankfully no. I wear a welding hood on my head which hopefully has reduced that a fair bit. Looks a bit like this:
I usually wear a respirator too, but was lazy yesterday and didn't. Wish I did in hindsight though.
- Scruffy Bodger
- TeeShirtFun
- Posts: 5329
- Joined: Mon May 27, 2019 9:18 pm
- Has thanked: 8125 times
- Been thanked: 2423 times
Re: 1974 Dolomite Sprint
Very sensible. I'm not one for health and safety and it's pretty much at the top of the recommended not what to do today list. Plus the fact you inevitably end up headbutting the vehicle you are working on while trying to remove it from a fizzing orifice.
- Hooli
- Self Appointed Internet God
- Posts: 33543
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14345 times
- Been thanked: 11128 times
Re: 1974 Dolomite Sprint
I've done that, you can hear your flesh cooking as it works it's way in. It's lovely*Scruffy Bodger wrote: ↑Tue Nov 10, 2020 9:32 pmHad a blob in your ear yet?SiC wrote: ↑Tue Nov 10, 2020 9:31 pmGot about that amount up my nose toorichardthestag wrote: ↑Tue Nov 10, 2020 1:05 pm
I have about 2kg of used grinder sparks on the workshop floor. I expect SIC does too
Private signature, do not read
- captain_70s
- Posts: 1018
- Joined: Thu Apr 11, 2019 5:34 pm
- Location: Glasgae
- Has thanked: 118 times
- Been thanked: 893 times
Re: 1974 Dolomite Sprint
If it makes you feel better some poor cunt is going to shell out for this one:
https://www.ebay.co.uk/itm/1975-Triumph ... Sww0tfrAJv
And probably find the exact same style of wheelarch repair on the offside...
https://www.ebay.co.uk/itm/1975-Triumph ... Sww0tfrAJv
And probably find the exact same style of wheelarch repair on the offside...
1976 Triumph Dolomite 1850HL - Field based greenhouse.
1977 Triumph Dolomite 1300 - Lean green oil dripping machine.
1983 Triumph Acclaim L - Japanglish daily runner.
1989 Volvo 740GLE Estate - Mobile storage unit.
1977 Triumph Dolomite 1300 - Lean green oil dripping machine.
1983 Triumph Acclaim L - Japanglish daily runner.
1989 Volvo 740GLE Estate - Mobile storage unit.
-
- It's S small i C
- Posts: 9373
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1826 times
- Been thanked: 5404 times
Re: 1974 Dolomite Sprint
I've been debating whether this is the right thing to do. The hole section under the windscreen area has thick steel at the top but then thin at the bottom where water has pooled. I didn't want to cut out the bad bit as it was mostly good metal. As it was an area of flex, I wanted to double skin it.
Essentially I have welded a piece of metal to the back side.
Then welded on the other side too.
I don't want to call it a patch repair but it kinda is. Biggest difference is that I'm welding on both sides, unlike a normal patch. I have debated whether to just cut the area out and have a single piece of metal all the way along. But in my mind, a piece along the back and welded on the front should be stronger.
Also made up a few pieces to box in this area once I'm done. I'll need to make a few holes in these so I can get the wax injector pipe in.
Also did the old trick of welding up a few of the holes on the A-Pillar. Usually takes a couple of goes of welding it up, grinding back down and welding up any holes that appear or thinness.
Ends up looking alright
This one was a tiny 2mm-ish sized hole, so nice and easy to fill up. The bigger hole to the right is going to need a bit more than that though!
So I slowly plod on with this. Main priority is to get all the metal work done first, then go from there. Depending how long that takes, I may put it back in storage after doing that - basically if I'm fed up of working on it and need a break. Also the cost of paint is pretty prohibitively expensive. But then still have a whole lot of mechanical work still to do too.
I'm really champing at the bit to start work on this too. Quite interested to seeing how they compare back to back as well! Similar BHP but the E28 weights another 200kg more. It should be less metalwork and more mechanical. So very much a welcome break from that and one project that should be satisfyingly quick to get on the road again.
Essentially I have welded a piece of metal to the back side.
Then welded on the other side too.
I don't want to call it a patch repair but it kinda is. Biggest difference is that I'm welding on both sides, unlike a normal patch. I have debated whether to just cut the area out and have a single piece of metal all the way along. But in my mind, a piece along the back and welded on the front should be stronger.
Also made up a few pieces to box in this area once I'm done. I'll need to make a few holes in these so I can get the wax injector pipe in.
Also did the old trick of welding up a few of the holes on the A-Pillar. Usually takes a couple of goes of welding it up, grinding back down and welding up any holes that appear or thinness.
Ends up looking alright
This one was a tiny 2mm-ish sized hole, so nice and easy to fill up. The bigger hole to the right is going to need a bit more than that though!
So I slowly plod on with this. Main priority is to get all the metal work done first, then go from there. Depending how long that takes, I may put it back in storage after doing that - basically if I'm fed up of working on it and need a break. Also the cost of paint is pretty prohibitively expensive. But then still have a whole lot of mechanical work still to do too.
I'm really champing at the bit to start work on this too. Quite interested to seeing how they compare back to back as well! Similar BHP but the E28 weights another 200kg more. It should be less metalwork and more mechanical. So very much a welcome break from that and one project that should be satisfyingly quick to get on the road again.
-
- It's S small i C
- Posts: 9373
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1826 times
- Been thanked: 5404 times
Re: 1974 Dolomite Sprint
Noticed this has gone from eBay. I wonder if it sold?captain_70s wrote: ↑Fri Nov 13, 2020 7:09 pm If it makes you feel better some poor cunt is going to shell out for this one:
https://www.ebay.co.uk/itm/1975-Triumph ... Sww0tfrAJv
And probably find the exact same style of wheelarch repair on the offside...
grimarch.jpg
I noticed that yellow one finished today and didn't hit reserve. Seller pretty greedy imo as £8500 seems a decent price for one. Especially considering it had rusty scab areas.
- fried onions
- Posts: 3316
- Joined: Wed Apr 10, 2019 6:29 pm
- Location: In my safe space (the garage).
- Has thanked: 1449 times
- Been thanked: 2372 times
Re: 1974 Dolomite Sprint
Hehe. We shall see.It should be less metalwork and more mechanical.
Squire Dawson
HUMBER - built stronger to last longer.
HUMBER - built stronger to last longer.
-
- Prize Cunt
- Posts: 6325
- Joined: Wed Apr 10, 2019 6:31 pm
- Location: Big Al Granvia’s armpit.
- Has thanked: 718 times
- Been thanked: 2337 times
Re: 1974 Dolomite Sprint
Projects end up on ebay as unfinished because of this. I would at least get the welding complete, paint the unseen bits and build the car up again before putting it into storage.
The E28 WILL need welding somewhere and rust is rust is rust.
I don't do resto projects anymore. I just have once nice old car and keep that up to scratch.
The E28 WILL need welding somewhere and rust is rust is rust.
I don't do resto projects anymore. I just have once nice old car and keep that up to scratch.