Eddie Honda's wheels of steel (and occasionally alloy)
- paulplom
- The Geordie Lord, Mario!
- Posts: 26243
- Joined: Fri Aug 23, 2019 7:01 am
- Has thanked: 10338 times
- Been thanked: 5529 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
I doubt that exhaust will come apart anytime soon. Clamp or otherwise. Could the arb have been bent when it has fallen over at any point?
- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21591
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13503 times
- Been thanked: 13282 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Agreed on the zorst.
I don't know. It may be that the drop link is seized preventing it articulating properly and pulling the end of the ARB in against the chassis.
I don't know. It may be that the drop link is seized preventing it articulating properly and pulling the end of the ARB in against the chassis.
- panhard65
- Posts: 3983
- Joined: Wed Apr 10, 2019 7:18 am
- Has thanked: 156 times
- Been thanked: 4587 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Or it could be not fitted in the D bushes properly. Have a look the other side and if it has loads of clearance loosen off the D bush clamps and lever it over.
1939 Hotchkiss 864
1971 Lancia Fulvia Berlinetta (for sale)
1977 Dodge 3700GT Hearse
1987 Renault 25 V6 Turbo
2007 Honda Jazz 1.4 (for sale)
2010 Skoda Felica tdi (for sale)
2013 Peugeot RCZ
2021 Yadea C1S Gay leccy scooter
1971 Lancia Fulvia Berlinetta (for sale)
1977 Dodge 3700GT Hearse
1987 Renault 25 V6 Turbo
2007 Honda Jazz 1.4 (for sale)
2010 Skoda Felica tdi (for sale)
2013 Peugeot RCZ
2021 Yadea C1S Gay leccy scooter
- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21591
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13503 times
- Been thanked: 13282 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Given the previous owner's skillz, it wouldn't surprise me.
It had a leaking tank when I bought it, traced to the sender retaining ring being loose.
It had a leaking tank when I bought it, traced to the sender retaining ring being loose.
- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21591
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13503 times
- Been thanked: 13282 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Rialto update
Did get up until half one. Got as far as taking the wheel off, then packed up again to go to work. Shame as it was dry.
I would have done more, but could do with shifting the shoe adjusters a touch. Apart from the state of the suspension arm, the mud guard that protects it is missing and there is condensation in the nearside headlamp.
Oh and I've just spied Satan's Scotchloks™
Did get up until half one. Got as far as taking the wheel off, then packed up again to go to work. Shame as it was dry.
I would have done more, but could do with shifting the shoe adjusters a touch. Apart from the state of the suspension arm, the mud guard that protects it is missing and there is condensation in the nearside headlamp.
Oh and I've just spied Satan's Scotchloks™
- christine
- Posts: 4260
- Joined: Wed Apr 10, 2019 9:50 pm
- Has thanked: 1331 times
- Been thanked: 1733 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Must be awkward cracking off wheelnuts on the front wheel if you have a flat tyre ?
- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21591
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13503 times
- Been thanked: 13282 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Can be. I somehow managed this one a couple of years ago when I moved it here. Had to get the rather knackered India GT swapped for current 'new' (but 10+ year old now) Falken Sincera. The windy handle supplied for the scissor jack is much longer so you can get it under the middle of the front cross member.
Other time was a front flat on the Regal, but they aren't as close to the road (and I was a racing snake back then).
Other time was a front flat on the Regal, but they aren't as close to the road (and I was a racing snake back then).
- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21591
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13503 times
- Been thanked: 13282 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Was up early enough today, but as usual...you know the story.
Okay, so this drum brake is effectively a left-hand twin-leading shoe type from a car. Grotty, but both shoe snail cam adjusters were moving freely.
Drum came off again with a few taps. Shoes have plenty of meat left
First up, brakes shoe steady spring / posts removed. Followed by the shoes and then the return springs removed from the backplate. Cut the pipes as it's cold and I'll be making new ones anyway. Foremost wheel cylinder bottom retaining set screw has a fucked head and no longer 7/16" or hexagonal, so out with the Koken NutTwister.
Top set screw has fucked head too.
Tap the cylinder out.
The nut heads have faired better on the rearmost cylinder. Used a socket on the lower one, but because of the flexi bracket being in the way, had to get a offset ring spanner onto the upper one.
As you can see in this last photo, I've gone and done a SiC and started prodding at the radius arm brace piece and put my fingers through it. Reliant galvanised the chassis, but fuck all else. Best I change it before it collapses.
45 minutes was my lot for today. Bone dry, but my fingers were numb in a short space of time. December = idiot
Okay, so this drum brake is effectively a left-hand twin-leading shoe type from a car. Grotty, but both shoe snail cam adjusters were moving freely.
Drum came off again with a few taps. Shoes have plenty of meat left
First up, brakes shoe steady spring / posts removed. Followed by the shoes and then the return springs removed from the backplate. Cut the pipes as it's cold and I'll be making new ones anyway. Foremost wheel cylinder bottom retaining set screw has a fucked head and no longer 7/16" or hexagonal, so out with the Koken NutTwister.
Top set screw has fucked head too.
Tap the cylinder out.
The nut heads have faired better on the rearmost cylinder. Used a socket on the lower one, but because of the flexi bracket being in the way, had to get a offset ring spanner onto the upper one.
As you can see in this last photo, I've gone and done a SiC and started prodding at the radius arm brace piece and put my fingers through it. Reliant galvanised the chassis, but fuck all else. Best I change it before it collapses.
45 minutes was my lot for today. Bone dry, but my fingers were numb in a short space of time. December = idiot
- Hooli
- Self Appointed Internet God
- Posts: 33614
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14394 times
- Been thanked: 11162 times
Re: Eddie Honda's wheels of steel (and occasionally alloy)
Haha @ doing a SiC, next you'll fit an oil pressure gauge.
Private signature, do not read