Eddie Honda's wheels of steel (and occasionally alloy)

Talk about your cars etc here. Keep it sort of sensible and on topic please.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

The 096 has the same oomph as a 017, just a smaller footprint. I could've chucked an 017 in the Jaaag as the battery hold down clamp is on the bottom edge.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

MISTER-AUTO UPDATE
IMG_20220704_114136_resize_94.jpg
IMG_20220704_114136_resize_94.jpg (100.86 KiB) Viewed 897 times
I last used them about 7 years ago. I ordered these parts mostly for the Pug at the same time as the Landy parts on the 16th June. Slow to be dispatched, they finally turn up today. They appear to have got the order correct.

Verdict: Some good prices, but don't use them if you're in a hurry.
User avatar
Scruffy Bodger
TeeShirtFun
Posts: 5292
Joined: Mon May 27, 2019 9:18 pm
Has thanked: 7951 times
Been thanked: 2392 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Scruffy Bodger »

Did that light fitting just get forgotten about in the end then? Those things went out with the ark so a potential fire hazard?
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Scruffy Bodger wrote: Mon Jul 04, 2022 6:43 pm Did that light fitting just get forgotten about in the end then? Those things went out with the ark so a potential fire hazard?
No idea and the rest of the house was built in nineteen canteen.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

HONDA JIZZ UPDATE

When I went out Saturday to do some Land Rover spannering, I noticed the return of an exhaust rattle. The heat shield behind the middle silencer had come adrift again and was hanging down at the rear and thus bouncing up and down onto the exhaust pipe. I'd already fixed it before with a penny washer, but even that had given up its function.

So off with the thing and find one of the front attachments needed looking at too.

IMG_20220712_140323~2_resize_39.jpg
IMG_20220712_140323~2_resize_39.jpg (133.93 KiB) Viewed 834 times

Had a drink...

IMG_20220712_140452_resize_78.jpg
IMG_20220712_140452_resize_78.jpg (101.77 KiB) Viewed 834 times

Then realised that was upsidedown and so folded it in reverse

IMG_20220712_140455_resize_1.jpg
IMG_20220712_140455_resize_1.jpg (98.69 KiB) Viewed 834 times

That'll do for now.

IMG_20220712_140822_resize_29.jpg
IMG_20220712_140822_resize_29.jpg (121.47 KiB) Viewed 834 times

And back on the car

IMG_20220712_141615_resize_48.jpg
IMG_20220712_141615_resize_48.jpg (138.91 KiB) Viewed 834 times
IMG_20220712_141620_resize_68.jpg
IMG_20220712_141620_resize_68.jpg (106.36 KiB) Viewed 834 times

I might replace it eventually, but for the time being I leave it there for the NCT man to have a snigger at next test.
User avatar
Scruffy Bodger
TeeShirtFun
Posts: 5292
Joined: Mon May 27, 2019 9:18 pm
Has thanked: 7951 times
Been thanked: 2392 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Scruffy Bodger »

Eddie Honda wrote: Tue Jul 12, 2022 2:30 pm
Scruffy Bodger wrote: Mon Jul 04, 2022 6:43 pm Did that light fitting just get forgotten about in the end then? Those things went out with the ark so a potential fire hazard?
No idea and the rest of the house was built in nineteen canteen.
Still wired in rubber? That type of baton holder has been obsolete for years, their house insurance will be totally invalid if something does happen.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Scruffy Bodger wrote: Wed Jul 13, 2022 5:47 pm
Eddie Honda wrote: Tue Jul 12, 2022 2:30 pm
Scruffy Bodger wrote: Mon Jul 04, 2022 6:43 pm Did that light fitting just get forgotten about in the end then? Those things went out with the ark so a potential fire hazard?
No idea and the rest of the house was built in nineteen canteen.
Still wired in rubber? That type of baton holder has been obsolete for years, their house insurance will be totally invalid if something does happen.
No idea, I'll pass the message on.
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

As I don't have a 2¹⁄₁₆" AF socket lying around, I've had to get a 52mm one for this LR job I will catch up on. I hear it doesn't really matter in this application that it's a lame ½" drive.
IMG_20220723_114144~2_resize_28.jpg
IMG_20220723_114144~2_resize_28.jpg (41.65 KiB) Viewed 742 times
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

TOMMY'S JAAAG UPDATE

Apparently it's a money pit. Glad it's not mine. :lol:
Screenshot_2022-07-30-13-19-47-129_com.android.chrome.jpg
Screenshot_2022-07-30-13-19-47-129_com.android.chrome.jpg (121 KiB) Viewed 692 times
User avatar
Eddie Honda
Rainman The Google Fu Master
Posts: 21172
Joined: Tue Apr 09, 2019 10:45 pm
Location: 寄居町
Has thanked: 13145 times
Been thanked: 12818 times

Re: Eddie Honda's wheels of steel (and occasionally alloy)

Post by Eddie Honda »

Land Rover update

After finally completing* the bathroom. I've been allowed out again, so LR spannering has recommenced.

Armed with a 52mm socket, I was able to attack the stupid 52mm hex hub covers. For whatever reason a PO had fitted heavy duty flanges.

Heavy-duty-drive-flange-1024x1024.png
Heavy-duty-drive-flange-1024x1024.png (713.02 KiB) Viewed 637 times

I needed to get three of these off, two to change the front discs and 1 to change a rear axle seal. The front OS popped okay with fat man on a 2ft breaker bar. The other two didn't want to know. Fucking stupid as they don't need to be megatight.

Went back home for a rattle gun. That eventually got the NS rear shifted. However the front NS was putting up a fight. It resisted the following:
  • Fat man on a 2ft breaker bar.
  • Fat man with a 450Nm rattle gun.
  • Fat man with a MAPP torch and a rattle gun.
  • Fat man on some large Stilsons
IMG_20220810_163705_resize_40.jpg
IMG_20220810_163705_resize_40.jpg (95.38 KiB) Viewed 637 times
  • Fat man on a slightly extended large Stilsons.
  • Fat man on a slightly extended breaker bar.

That ended in the inevitable

IMG_20220810_170202_resize_41.jpg
IMG_20220810_170202_resize_41.jpg (77.1 KiB) Viewed 637 times

All that, to no avail.

IMG_20220810_170209_resize_30.jpg
IMG_20220810_170209_resize_30.jpg (67.1 KiB) Viewed 637 times

So thin man gets the gas axle out.


IMG_20220810_180311_resize_95.jpg
IMG_20220810_180311_resize_95.jpg (96.1 KiB) Viewed 637 times

And fat man with a rattle gun goes again.

IMG_20220810_180731_resize_87.jpg
IMG_20220810_180731_resize_87.jpg (73.88 KiB) Viewed 637 times

Big success! FIRE IS KING!
IMG_20220810_181912_resize_78.jpg
IMG_20220810_181912_resize_78.jpg (85.55 KiB) Viewed 637 times
Although I have a new problems now. After dealing with next two nuts which some fucking animal in the past had been at with a chisel, I got a flange headache. Out of the 5 bolts holding the flange onto the hub. 2 are shorter than the should be. Animal looks to have gone mad with sealant on flanges and used it also to stick the broken bolts back in their respective holes for cosmetic purposes. So I have some extracting, tapping and new 10.9 bolts to fit.
Post Reply