1966 Plymouth Fury 3

Talk about your cars etc here. Keep it sort of sensible and on topic please.
Post Reply
User avatar
PhilA
Posts: 2926
Joined: Thu May 30, 2019 1:24 pm
Location: Larose, LA, USA
Has thanked: 915 times
Been thanked: 6446 times
Contact:

1966 Plymouth Fury 3

Post by PhilA »

20210415_182049.jpg
20210415_182049.jpg (609.58 KiB) Viewed 19798 times
I now own this. Yes, the big scrape down the door was me, loading it. On the bright side I know it's all metal all the bottom of the wing and door.


I've got the car loaded up with parts, heading back home tonight, the seller offered to haul it down with his truck for the price of fuel so I jumped at that.

So, a bit of backstory. Guy bought the car back in 2010, running (ish), smoked about in it for a while then realized the original engine was toast. So, be bought a complete beater of a Fury which he broke for parts.
He rebuilt the engine a bit bigger, it's a 327 (5356cc) now, not a 318 (5211cc), tubular dual exhausts, few other ninaks. Gearbox was gone through he says.

Then the sad part. He's originally from California, posted in the navy police. He was serving back there for a while and while he was away he found a guy who was all about restoring old cars and sent the car to him to be rebuilt.
So, the guy chopped out a fair bit of rust, replaced it with metal, did a bit of bondo work then painted it. The car was originally white, and was chosen to be repainted by the seller in mauve.

He said "Whatever parts you need, let me know if I'll send it you", so was ordering parts.
He arrived back in Mississippi, stopped in at the place... The guy has skipped town, done an epically poor job of painting the car (though he did hang the doors and trunk well, I'll give him that), and applied a random sheet of steel with some pigeon-poop in the trunk where the trunk floor had rusted out.

I'm not sure what I'm going to do, but I think I may actually get the car back down to metal, straighten it out and paint it. I've done better paint with aerosol cans.

So, he gets left with the car as you see it. Sad, but he got gypped out of a five-figure sum for essentially what comes down to a $200 paint job and a bit of crummy welding.

There's a spare block (might do something fun with that) and some trim, dash, odds and ends in boxes, some new lights, but there's a bunch of stuff I'm going to have to source. Looks like the car might have been in a hail storm at some point too, so that needs straightening up.

So, yes. Work, but should be fun.

Phil
Pontac Cheepten
Plymmut Furey
User avatar
brandersnatch
I scored very low on the autie test. I’m cheerful, happy, confident, like meeting new people, chatty and largely sociable. What the fuck am I doing on this forum?
Posts: 4245
Joined: Wed Apr 10, 2019 8:41 am
Has thanked: 3798 times
Been thanked: 2503 times

Re: 1966 Plymouth Fury 3

Post by brandersnatch »

I’m in.
User avatar
Asimo
Posts: 624
Joined: Thu May 23, 2019 7:46 pm
Location: In the wind
Has thanked: 787 times
Been thanked: 1130 times

Re: 1966 Plymouth Fury 3

Post by Asimo »

Good luck with this!
Shame the paint is poor, I think the color really suits the car. So do the wheels.
User avatar
Hooli
Self Appointed Internet God
Posts: 33181
Joined: Mon Apr 08, 2019 9:25 pm
Has thanked: 14100 times
Been thanked: 10988 times

Re: 1966 Plymouth Fury 3

Post by Hooli »

Looks a tight fit on there, I'm not surprised it brushed* the edge.
Private signature, do not read
User avatar
mercrocker
Numb3rP14t3Fun
Posts: 16793
Joined: Fri May 17, 2019 2:53 pm
Has thanked: 12083 times
Been thanked: 8520 times

Re: 1966 Plymouth Fury 3

Post by mercrocker »

That's gonna keep you busy.....What's Chiefy going to say?
There's a great long bar in Rock & Roll heaven.......
red5
Posts: 1011
Joined: Thu May 23, 2019 9:21 am
Has thanked: 105 times
Been thanked: 582 times

Re: 1966 Plymouth Fury 3

Post by red5 »

Cracking effort. Looks ok on the colour notwithstanding crappy paint as well...😁
59Impala
Posts: 810
Joined: Sat Jan 11, 2020 5:34 pm
Has thanked: 1027 times
Been thanked: 865 times

Re: 1966 Plymouth Fury 3

Post by 59Impala »

Nice project but a shame about the guy being ripped off, that seems to happen quite a lot. Back in the mid-80's a friend asked me to accompany him to somewhere in Oxfordshire to look at a '66 Fury the same as yours except it was a 383/auto car and you could drive it. Think it was about 600 quid so he bought it and I drove it back to SE London with no problems. It was a decent car, reliable and a good body. Quite quick but I did dust him at Santa Pod with my '73 Grand Prix with 400 & four speed :-).
Last edited by 59Impala on Fri Apr 16, 2021 5:31 pm, edited 1 time in total.
User avatar
PhilA
Posts: 2926
Joined: Thu May 30, 2019 1:24 pm
Location: Larose, LA, USA
Has thanked: 915 times
Been thanked: 6446 times
Contact:

Re: 1966 Plymouth Fury 3

Post by PhilA »

59Impala wrote: Fri Apr 16, 2021 12:41 pm Nice project but a shame about the guy being ripped off, that seems to happen quite a lot. Back in the mid-80's a friend asked me to accompany him to somewhere in Oxfordshire to look at a '66 Fury the same as yours except it was a 383/auto car and you could drive it. Think it was about 600 quid so he bought it and I drove back to SE London with no problems. It was a decent car, reliable and good body. Quite quick but I did dust him at Santa Pod with my '73 Grand Prix with 400 & four speed :-).
Yeah, they were just starting to get the idea of "fast production car" by the sixties.
Pontac Cheepten
Plymmut Furey
User avatar
PhilA
Posts: 2926
Joined: Thu May 30, 2019 1:24 pm
Location: Larose, LA, USA
Has thanked: 915 times
Been thanked: 6446 times
Contact:

Re: 1966 Plymouth Fury 3

Post by PhilA »

20210416_101139.jpg
20210416_101139.jpg (241.44 KiB) Viewed 19703 times
Took one of the headlight bezels and decided to see what would happen to it if I took to it with some metal polish.
20210416_105949.jpg
20210416_105949.jpg (696.1 KiB) Viewed 19703 times
Promising result. I'll finish it up with machine polishing.

Phil
Pontac Cheepten
Plymmut Furey
User avatar
PhilA
Posts: 2926
Joined: Thu May 30, 2019 1:24 pm
Location: Larose, LA, USA
Has thanked: 915 times
Been thanked: 6446 times
Contact:

Re: 1966 Plymouth Fury 3

Post by PhilA »

20210416_143400.jpg
20210416_143400.jpg (338.73 KiB) Viewed 19693 times
It are arrive.

Phil
Pontac Cheepten
Plymmut Furey
Post Reply