Many thanks, changed the lower arm bushes and arms last year but will check for wear. Only thing changed within the last month was the track rod end-will put another one on.

Steve

Hello all, Got a problem with my Sierra. Started about 2 weeks ago-steering wobble at certain speed just as if the wheels were not balanced. Had a look-no weights loose-jacked it up - no play anywhere. Ok for a while then it came back. Swapped wheels front to back-ok again for a while-checked all st...

Another years MOT for the Sierra. Needed a track rod end and two bits of welding on the rear arches-£185 -couldn't be bothered pulling the MIG out and freezing for that! Heres a before pic-too dark tonight. They replaced all the rusty bits you can see on the wheelarch near the door on both sides. ht...

Thought I'd better get on with trying to remove the leaking steering box. I'd disconnected the linkages to the wheels a few months(!) back. Today I removed the servo which gives much better access. Also noticed the master cylinder was leaking into the servo. Have spare servo and master cylinder so w...

Mot passed again for my Range Rover. Had it nearly 16 years now. Calipers and backplates need cleaning up-quite rusty. Also found out why air con stopped working-the drier is rusted through.

Could smell petrol from rear of Sierra over the last couple of days. Had a look today and fuel filter leaking. Think it must be the original-had the car 22 years and haven't changed it. Luckily had a new one with washers I bought "a few" years ago to change. Petrol didn't look to clever ou...

Found a drip from the back diff of my Range Rover. Then these two commandeered the boot.

Back from a few days holiday in North Wales. Here's the Sierra at Lake Bala-another 500 miles completed.

Mine was my brothers XJS HE. Here's the day before the wedding in 1999-me on the left-brother on the right.

Gave the Sierra a wash today after rubbing a bit of surface rust off the underneath from the driveshafts back. Kurust and then a coating of Screwfix red lead (no lead). Another coat tomorrow and the underseal-then onto the middle. Underneath not bad though after last years welding fest! https://i.im...