Alf’s Riley

[Alf892]

I’ve got one……but stored in place that is hard to reach with car in garage.

I’ll worry about that when needed!

[Alf892]

Been off work last couple of days so done a few more bits.
First was lapping the exhaust valves in……seats needed cutting really but starting off with coarse paste and elbow grease got them done

IMG_1435.jpeg (1.1 MiB) Viewed 4753 times

Inlets all looked reasonable so didn’t spend long on them

IMG_1440.jpeg (1.28 MiB) Viewed 4753 times

Also removed the hotspot tube between 2 and 3……..apparently helps a lot with cooling. Was proper tight to get out though

IMG_1438.jpeg (1.28 MiB) Viewed 4753 times

All valves done so gave them a wet test. Refitted valves and springs then fill combustion chamber with water and blow with compressed air from behind

IMG_1441.jpeg (943.35 KiB) Viewed 4753 times

Bit of a setback here……numbers 1 and 3 leaked a little so had to remove and lap them a little more.
Cleaned up all springs and finished building up……head now all done so next will be just cleaning up bits and pieces for assembly.

IMG_1439.jpeg (1.3 MiB) Viewed 4753 times